FLOPPY DISK fail (40)

F L O P P Y D I S K f a i l
( 4 0 )
Having the following message at
startup means that there is a
problem with your floppy drive.
To handle this problem try the
following:
- Check in the device manager that
there is no yellow exclamation
point near the floppy drive, if so
reinstall the driver.
- Go into the BIOS and check if
your floppy drive is set as
primary boot device, if so
change it (set the Hard Disk as
primary boot device).
- Go into the BIOS and set your
floppy drive A as Disabled or Not
Installed, save with the F10 key
and restart your PC.
- Make sure the floppy drive is
connected.
If this persists disconnect
(permanently) the floppy drive
from the PC.

Thanks to jlpjlp for this tip on
CCM!

TRANSLATE:
FLOPPYDISK gagal (4 0)
Memiliki
pesan berikut saat startup
berarti bahwa ada masalah
dengan floppy drive Anda.
Untuk menangani masalah ini
coba berikut ini:
- Periksa di
device manager bahwa tidak
ada tanda seru kuning di dekat
floppy drive, jika demikian
instal ulang driver.
-Pergilah ke
BIOS dan periksa apakah disket
ditetapkan sebagai perangkat
boot utama, jika demikian
mengubahnya (mengatur Hard
Disk sebagai perangkat boot
primer).
- Pergilah ke BIOS dan
mengatur disket A Tidak sebagai terpilih,
simpan dengan tombol F10
dan restart PC Anda.
-Pastikan
floppy drive dihubungkan. Jika
hal ini terus berlanjut
disconnect (permanen) floppy
drive dari PC.

*******